DOUBLE TAP is a Tap Tempo Foot Switch which has two separate outputs being controlled from one Foot Switch. The two outputs are totally separate circuits, and are therefore fully isolated from each other.
DOUBLE TAP provides ultimate programming flexibility by the use of dip switches, which can be accessed by removing the side panels.
Each output can be separately programmed as:
- Normally Closed or Normally Open.
- Switch contact between Sleeve & Tip, Sleeve & Ring, or Sleeve & Tip + Ring.
- Engage a 4.7k pull-up resistor between Sleeve & Tip or Sleeve & Ring.
- LEDs are provided for applications where the Foot Switch is used to latch a device ON, and that device provides power for the LED. For most Tap Tempo applications, the LEDs will not light up.
Specifications
Dimensions……….115 x50x 49 mm(4.5 x2.0x 1.9“)
Weight………………170g(0.4lb)
Power……………….N/A (Passive switch)